Rooftop Equipment Curbs and Supports in Arlington, TX

Rooftop equipment curbs and supports in Arlington, TX. We sort out the curb, the equipment and the roof flashing so each trade's work is clear before anything is cut.

Hail came through Arlington in late May 2024, and rooftop units, curbs and the flashing around them take the brunt of storms like that. Still, a storm in the area doesn't mean your equipment or its roof connection was damaged. Rooftop equipment curb and support work in Arlington, TX means looking at the actual unit, curb and roof together. You should know which work belongs to the equipment contractor, which is curb or framing repair, and which is the roof flashing.

Have your building contact tell us which equipment areas are involved and send any drawings and site rules. We inspect the roof and note where your mechanical contractor or an engineer needs to weigh in. We identify the equipment and supports involved, then sort out the curb and roofing work the job needs. The estimate follows what we find and lists what has to happen before the final flashing goes on.

If you also manage sites in Dalworthington Gardens and Duncanville, each one keeps its own record of the roof system and work limits.

First we need to know what the job is: an existing curb that's leaking, a support that's failing, or new or replacement equipment going in. Drawings and equipment specs help us pin that down. We identify which roof areas will be affected and who needs to sign off before the flashing detail is set. A roofing estimate shouldn't quietly include equipment changes nobody has defined.

A roof inspection around the equipment records what we see at the curbs and on the membrane. If there's a leak, our leak repair work checks whether the curb is really the source. We keep your observations separate from our findings and note anything that needs more checking. That way the next step fits the real problem, not the assumption that every leak near a unit needs the same patch.

The roof flashing is only as good as the curb behind it. We check what we can reach and flag anything that needs your mechanical contractor or an engineer to look at, like a rusted rail or a curb that's pulling loose. If repair is needed, the estimate shows where and in what order, before the permanent flashing goes on. A curb that looks fine from the outside isn't automatically sound underneath.

You'll know who needs to check the equipment or support and what they need to look at. We keep that separate from the roofing prep and tell you when the membrane work can start. If we have to open something up to see the framing or wood blocking, we plan that and the repair that follows. That keeps the roofing price from assuming a support is fine just because it shows up on a drawing.

At each curb, we look at the membrane and the curb surfaces the new flashing will bond to. Old patches, coatings and rotted wood blocking all change the prep. We map where materials change and confirm anything we're unsure of. The scope lists the repairs needed before the new flashing goes on, not just the membrane type.

Our skylight and penetration flashing work covers the blocking and prep at curbs and openings. Flashing failure repair helps us find where an old flashing let go and how far the repair needs to go. You'll see the actual task and anything still needing a look. Photos include enough of the roof and the unit that another crew can find the same curb, with any blocking repairs clearly marked before the flashing is installed.

We confirm the membrane before choosing how to prep and flash the curb. Roof records help, but old patches and coatings need their own check where the new work ties in. Once we know the material, we spell out the cleaning, removal and testing the job needs. "Repair curb flashing" isn't a real scope when nobody knows what the membrane is.

A TPO curb flashing repair needs the specific TPO membrane and a weldable surface, and old patches need a look. An EPDM curb flashing repair uses different primers, tapes and flashing materials. We don't use one method on both just because the curbs look the same. The estimate notes which materials stay, what the new detail is, and anything we still need to confirm.

New or replacement equipment can create a chain of related tasks. The scope should show the equipment work, the curb or support repairs and the membrane prep as separate items. We explain when another trade's work has to come first so you can schedule it. The roofing crew shouldn't have to guess whether a curb is ready to flash.

We record the materials and prep we did before the final flashing. Any equipment or support question outside our scope stays listed. A photo of new flashing doesn't mean we checked framing we never saw. You keep a clear description of the finished detail and anything still open, so a later contractor doesn't assume the whole equipment project was finished just because the roofing is.

Equipment work can change the curb, the supports, vibration and the roof flashing all at once. Identify which equipment is being added or changed and who is responsible for shutdown, lifting, attachment design and installation. Roofing crews should receive a finished, solid curb with sound blocking before building the permanent flashing. If existing curbs will be reused, confirm their size and condition against the new equipment rather than assuming the new unit fits the old opening. Schedule the work so the membrane isn't cut before the equipment plan is settled, and plan temporary protection if an opening has to stay open overnight. At the end, photograph the roof connection after the equipment is set and note any service clearance the owner needs to keep open. The roofing estimate should price its own flashing and prep while making clear what the other trade must finish first.

Have your building contact mark the equipment areas and send any project records. We plan the inspection and note what the equipment contractor needs to check. Then we report on the unit, curb and roof flashing we looked at, with support repairs and prep listed before the flashing work goes ahead.

For rooftop equipment curb work in downtown Arlington, the finished record identifies the membrane and the flashing detail we installed. Photos, prep notes and open questions stay together so another crew can find the work. You can schedule the next inspection or repair from a clear record, with equipment and support responsibilities kept separate from the roof flashing we actually did.

What should a request for equipment curb work explain?

Which unit and roof area are involved and whether equipment is being added, replaced or removed. Drawings and site rules help us figure out who else needs to sign off before the flashing is designed.

Does new curb flashing mean the curb underneath is sound?

No. It shows the roofing work we did. The curb framing and supports need their own check if there's any doubt about them.

How do old patches affect a curb flashing repair?

We find where the patches start and stop and confirm what they're made of. The cleaning, removal and prep have to match the membrane and curb surfaces that are actually there.

What should the record keep for a future equipment project?

The flashing detail we installed, the prep we did and any curb work completed. Open support or equipment questions stay listed alongside the photos.

Send your Arlington equipment locations and any project records. We'll inspect the curb and roof connection and explain the prep and other trades' work needed first.

• equipment-area roof inspection locating visible component and membrane observations
• leak investigation comparing symptoms with the examined curb connection
• penetration detail review defining backing and adjoining component preparation
• flashing defect assessment locating the failed connection and required correction
• TPO curb examination identifying the sheet and earlier repair materials
• EPDM equipment detail review establishing material and preparation requirements
• Arlington downtown equipment-area roofing with component and support duties located